Hardware Kit for DIY 3D Printer Belt Tension Meter – by PF Makes

Description

Hardware kit for the PF Makes Belt Tension Meter.

If you’ve chosen to print your own Belt Tension Meter this kit contains all of the hardware to get you up and running. All you need to do is print the parts, assemble, and calibrate.

Kit Contains:

• 1 x BOM spec compression spring
• 1 x Pre-cut and deburred tempered calibration wire
• 1 x M3x25 socket head cap screw
• 1 x M3x8 socket head cap screw
• 1 x M3x8 stainless steel washer
• 2 x M2x10 self tapping screws
• 1 x Cotton swab w/chamfered end for applying grease

You will need

• 1 x 3mm Drill Bit or 1 x 3mm Ream for reaming holes
• Grease (Superlube or a Silicone-based grease that will not eat plastic)
• Set of Printed parts in ABS

For detailed instructions and STL files for printing visit PF Makes github here.

LeeMerie3D has an excellent video of how to assemble the Meter: